Mesis PressoMassaggio Plus+ - Page 46

Instructions for use applicators with 4 chambers
IMPORTANT NOTE: the applicators and the accessories provided with the machine
may vary depending on the purchased model.
1. Connect the connector to the applicator that you want to use.
Choose the connector and/or the splitter to be connected depending on the applicators
you would like to use:
• use the single connector with the arm cu (Fig. A);
• use the single connector with the abdominal/buttocks belt (Fig. B);
• use the single connector with the leg cu (Fig. C);
• use two single connectors and one splitter with two leg cus (Fig. D);
• use three single connectors and two splitter with two leg cus and the abdominal/
buttocks belt (Fig. E);
Connect each nozzle (air outlet) on the end of the rubber hoses of the single connector
to the relative inset on the applicator/s you want to use.
ATTENTION: make the connection by combining the nozzle and the insert,
according to the color. Nozzle and insert must have the same color.
Arm cu, Abdominal/buttocks belt and Leg cu used individually
• connect the nozzles on the end of the rubber tubes of the single connector to the insert
on the applicator you want to use.
Nozzle (air out-
let) on the end of
the rubber hoses
of connectors
Insert present on
the applicators
Fig. C
Connector‘s
connection to the
machine
Leg cu
Single
connector
Fig. B
Connector‘s
connection to the
machine
Abdominal/buttocks belt
Single
connector
Fig. A
Connector‘s
connection to the
machine
Arm cu
Single
connector
46
English User manual: PressoMassaggio
®
Plus
+