EasyManua.ls Logo

Mesis PressoMassaggio Plus+ - Page 48

Mesis PressoMassaggio Plus+
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. Connect the power cord. 3. Connect the single connector or the
splitter, to the unit.
In the PressoMassaggio
®
Plus
+
, the
connection “machine-connector or divisor”
is located on the side of the machine.
4. Put on the applicators that you wish
to use.
Leg cus
Put on the leg cus and close them with
the zipper, place the leggings with the at-
tachments turned inwards.
Ination must start at the feet and
gradually reach the groin.
Abdominal/buttocks belt
Put on abdominal belt on the buttocks-
hips-abdomen and fasten it with the Vel-
cro.
The ination must start from the up-
per part of the abdomen and proce-
ed downwards (groin).
Arm cu
Put on the arm cu.
Fasten the velcro “strap” on the shoulder
opposite the one with the arm cu;
The ination must start from the
hand part and then go toward the
shoulder in sequence.
5. Press the power button to start the
unit.
In the PressoMassaggio
®
Plus
+
, the power
button is located on the front of the machine.
IMPORTANT: for the instructions for use of
the unit, please refer to the relevant section.
IMPORTANT:
Make sure that the ination takes place in the direction indicated on page 39 in the “In
tion direction” section of the “Features Mesis
®
PressoMassaggio
®
Plus
+
” chapter.
„Male“ connection
of the connector or
splitter
„Female“ connection
on the machine
48
English User manual: PressoMassaggio
®
Plus
+