Need help?Do you have a question about the Messner eco Series and is the answer not in the manual?
General| Voltage | 230 V |
|---|---|
| Cable Length | 10 m |
| Protection Class | IP68 |
| Frequency | 50 Hz |
| Type | Submersible |
| Inlet/Outlet Size | 2 inch |
Details on the single-phase alternating-current motor, waterproof encapsulation, and overload protection.
Specifies use in garden ponds, fishponds, fountains, and swimming pools with safety requirements.
Instructions for operating the pump outside water, including setup and connection tips.
Checks for mains lead, plug, voltage, RCD connection, and handling of damaged parts.
Steps to prevent dry running, ensure proper submersion, and initial operation settings.
Explanation of thermal overload trip, causes of shutdown, and troubleshooting steps.
Step-by-step guides for disassembling and reassembling the pump for cleaning.
Recommendations for regular cleaning, checking performance, and specific care for calcareous water.
Guidance on checking pump performance and cleaning frequency based on pond conditions.
List of pump components with designations, types, article numbers, and quantities for ordering.
Instructions for protecting the pump from freezing during winter storage.
Details on warranty period, coverage for faults, exclusions, and claim procedures.
Information on the proper disposal of electronic devices according to EU regulations.
To Next Page