META Quest 3 - Temperature

24
modify batteries. Do not mix old and new AA
batteries; replace them all at the same time.

Exhausted batteries may leak and damage
your controllers. Remove exhausted
batteries promptly. Remove batteries
before storage or extended non-use.
Promptly recycle or dispose of
used batteries.
• Contact Meta Quest Support if you need
battery or power management support for your
Meta Quest. Meta Quest Care and Handling
• Do not use external battery packs or power
sources other than those authorized by
Meta Quest. Unauthorized Hardware and
Software or Accessories
• Do not dispose of your Meta Quest in a fire or
incinerator, as the batteries may explode when
overheated. Do not store with or dispose in
general waste.
Mishandling to avoid. The following could
induce battery or other electrical failure in
your Meta Quest ( MetaQuest Care
and Handling):
• Disassembling, crushing, bending,
deforming, puncturing;
• Exposing to high heat or sources of heat;
• Exposing to liquids;
• Dropping; or
• Charging or using if the device does not turn
on after attempted charging.
Temperature
Check the temperature
of your headset and
controllers periodically to prevent burns
or discomfort.
Your headset, controllers, charging dock,
and power adapter comply with applicable
limits for industry surface temperature
standards. Some contact points—including
front surfaces—may feel warm. This is
normal while in use or while charging.