To Next PageTo Next Page
Need help?Do you have a question about the Metabo HWA 6000 Inox and is the answer not in the manual?
General| Brand | Metabo |
|---|---|
| Model | HWA 6000 Inox |
| Category | Water Pump |
| Language | English |
States compliance with directives and standards for the pumps/domestic water systems.
Details intended applications like garden watering and domestic water supply, excluding food.
Emphasizes reading instructions and following warnings to prevent injury and device damage.
Covers user age, supervision, RCD requirements, and DIN standards for specific installations.
Warns against environmental hazards, hot water scalding, and electric shock risks.
Stresses checking for damage and prohibiting self-repair, warning of water damage from faults.
Introduces the illustrated components of the pump system for user reference.
Specifies positioning on a flat surface, ventilation, frost protection, and flood-proofing.
Details on mechanical forces, intake filters, check valves, and line specifications.
Covers connecting to pipe networks and ensuring safe, earthed power supply with RCD.
Guides on setting pilot pressure and filling the pump with water before operation.
Explains LED indicators, standby modes, and automatic startup for electronic models.
Describes the principle of operation for garden pumps (P designation) and safety notes.
Explains the automatic on/off switching based on water removal for HWA/HWAI models.
Details automatic operation for HWW/HWWI models, including pressure vessel function.
Covers checking for damage, leaks, cleaning filters, and verifying pressure vessel pilot pressure.
Step-by-step guide for disassembling, cleaning, and reassembling the suction filter unit.
Instructions for protecting the pump from frost and storing it during cold periods.
Steps for safely draining and storing the pump and accessories in frost-free conditions.
Addresses common issues like no voltage, low voltage, dry run protection, overheating, and motor faults.
Covers problems like lack of water, insufficient filling, suction line leaks, and high suction height.
Diagnoses low pressure, continuous cycling, and water discharge from air valves.
Guides on restoring pilot pressure in the pressure vessel when the pump cycles frequently.
