PRODUCT: TJ/LJ/YJ Front Flares
The MetalCloak experience includes the ease of installation of our products. We design for most contingencies, but
installation may be different based on different Jeep condition, configuration and/or year.
We are continually trying to improve our products and instructions – please help us by providing feedback and pictures
if you find any part of the instructions that do not match your particular Jeep or are not easily understandable.
If you have any difficulties at all, please give us a call. Thank you and enjoy your MetalCloak Products!
IMPORTANT NOTE: We use Stainless Steel Hardware where possible. Therefore, a tube of Silver Anti-seize is provided
and should be used on all bolts—only a small amount is needed.
WARRANTY INFORMATION: This article is sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user
from injury or death. The user assumes that risk. The effectiveness, warranty and longevity of this equipment are directly related to the manner in which it is INSTALLED, USED
and/or MAINTAINED. THE USER ASSUMES ALL RISK. By purchasing this product and opening the packaging, purchasers expressly acknowledge, understand and agree that they
take, select and purchase these MetalCloak products from Armored Works, LLC, its affiliates and distributors and agents as is and with all faults. The entire risk as to the quality
and performance of these MetalCloak products is with the purchaser. Working on your vehicle can be a dangerous activity. If you are unsure of what you are doing, please leave
mechanical or safety critical work to a skilled mechanic. We take no responsibility for the incorrect use and/or installation of MetalCloak products.
READ INSTRUCTIONS IN FULL BEFORE INSTALLATION.
QUESTIONS? CALL 916-631-8071 M-F 8:00 AM – 5:00 PM PST
REV: D | 7-14-10 | II-2240
1 of 5
To Next Page
Need help?
General
