Need help?Do you have a question about the Metek DREXELBROOK Universal IV Lite and is the answer not in the manual?
General| Brand | Metek |
|---|---|
| Model | DREXELBROOK Universal IV Lite |
| Category | Transmitter |
| Language | English |
Provides an overview of the Universal IV system for level measurement.
Details the Capacitance and RF Admittance measurement technologies.
Lists and describes the different Universal IV model configurations.
A table outlining various probe options for the system.
Specifies the environmental ratings and classifications for the unit.
Steps for unpacking the transmitter and verifying contents.
Safety guidelines for installing in potentially explosive atmospheres.
Instructions and recommendations for mounting the electronic unit.
Guidance on connecting the wiring for the electronic unit.
Instructions for connecting the sensing element wiring.
Information on protecting against static electricity discharge.
Guidance on protecting against lightning and surge voltages.
Recommendations for managing Radio Frequency Interference.
Details on using electrostatic filters in specific applications.
Steps for installing the necessary USB modem for software use.
Instructions for downloading and installing the HRTWin software.
Explanation of the various function keys within the software.
Covers overall configuration, level, vessel, and range value setup.
Details on Point Calibration and Capacitance Calibration methods.
Procedure for adjusting the transmitter's mA output.
Options for configuring the unit's display settings.
Defining the relationship between level and output current.
Instructions for saving and printing configuration entries.
Procedures and results for validating the transmitter's performance.
Using the device's keypad for configuration and calibration.
Understanding and interpreting device status and error messages.
Configuration settings for operating in HART multi-drop mode.
Initial steps for connecting and starting the HART calibrator.
Sequence for configuring the transmitter using a HART handheld device.
Covers Point, Fine Tuning, Capacitance, and Strapping Table calibrations.
A form to record calibration data and results.
A chart to help identify problems based on symptoms.
Steps for troubleshooting problems related to the transmitter loop connection.
Diagnosing issues where the transmitter doesn't communicate with software.
Procedures to test the stability of the transmitter's output.
Troubleshooting steps for problems with the sensing element.
Steps for diagnosing problems with the coaxial cable.
How static electricity can impact transmitter readings and function.
Guidance on identifying and mitigating RFI issues.
Contact information and details for obtaining factory assistance.
Information regarding the availability of trained field service engineers.
Details on available customer training seminars.
Process and requirements for returning equipment for evaluation or credit.
A form to gather information for effective troubleshooting.
Comprehensive technical specifications for the Universal IV transmitter.
Essential safety precautions for installations in hazardous areas.
Specific warnings and cautions for explosive atmosphere installations.
A brief overview of the Universal IV's measurement capabilities.
Safety considerations for electrical connections in hazardous zones.
A checklist for safely commissioning the device.
Instructions for opening and closing the device's compartment cover.
Details on FM, ATEX, and IECEx certifications and standards.
Control drawings specific to ATEX and IECEX hazardous area certifications.
Control drawings related to FM US and FMC hazardous area certifications.
To Next Page