Metra Electronics 99-6515B - Dash Disassembly

1. Remove the (4) radio removal tool
covers from the factory radio. (Figure A)
2. Using Metra’s 86-5618 radio removal
tools pull the factory radio from the
dash. (Figure B)
3. Remove (1) 10 mm bolt from the center
rear of the metal radio support and (2)
Phillips screws from both sides of the
support then remove it from the sub
dash. (Figure C)
Fiat 500 2012-up
Dash Disassembly 99-6515
(Figure C)
(Figure A)
(Figure B)