METREL MI 3122 User Manual

MI 3122 Smartec Z Line-Loop / RCD Settings
21
4.2.3 Memory
In this menu the stored data can be recalled and
deleted. See chapter 6 Data handling for more
information.
Figure 4.4: Memory options
Keys:
UP / DOWN Selects option.
TEST
Enters selected option.
Function selectors
Exits back to main function menu.
4.2.4 Date and time
Selecting this option will allow the user to set the
date and time of the unit.
Figure 4.5: Setting date and time
Keys:
TAB
Selects the field to be changed.
UP / DOWN Modifies selected field.
TEST
Confirms new setup and exits.
Function selectors
Exits back to main function menu.
Warning:
 If the batteries are removed for more than 1 minute the set time and date will be
lost.
4.2.5 RCD standard
RCD normative reference can be selected
by this option.
Figure 4.6: Selection of RCD test standard
Keys:
UP / DOWN
Selects standard.
TEST
Confirms selected standard.
Function selectors
Exits back to main function menu.

METREL MI 3122 Specifications

General

Brand	METREL
Model	MI 3122
Category	Multimeter
Language	English