■■■■■■■■■■■■■■■■■■■■■■
4 Installation
930 Compact IC Flex Oven SeS/PP/Deg (2.930.2560)
■■■■■■■■
25
Setting the contact pressure correctly
1
■ Fully loosen the contact pressure lever , i.e. press it all the way
down.
■ In the software, activate the drive of the peristaltic pump with the
desired speed.
■ Raise the contact pressure lever one step at a time until liquid
flows.
■ When liquid starts flowing, raise the contact pressure lever by an
additional two ratchet increments.
The contact pressure is now set optimally.