4 - Continuous rotation
Some receivers have 2 methods of rotation: a normal rotation to make
the motor turn continuously, and a rotation step by step to sharply
adjust the position. If your receiver gives you only one method, consider
that it is the continuing rotation.
During the rotation, a power and quality indicator indicates the
1 - Put the receiver on the reference satellite channel
If the receiver is pre programmed, put it on the satellite channel you
want. Choose preferably a channel with a high symbol rate (SR), which
means greater or equal to 22 000.
2 - Go into the DiSEqC 1.2 menu
This menu allows you to make the motor turn. Sometimes, to access
this menu, it will be necessary to activate the DiSEqC 1.2 function.
3 - Reset the motor
It is the reboot of the motor. Sometimes, this function is called
Reference position or Zero position.
Diagram 1: reference channel
n° Satellite Position Ø Channel nb Channel TP (freq / SR /pol)
1 Atlantic Bird 3 5°W 60 cm 577 GCPE1 12543 / 27500 / H
3 Astra 19 19,2°E 60 cm 248 TV 5 11568 / 22000 / V
4 Hot Bird 13°E 60 cm 030 ZDF 11054 / 27500 / H
5 Eutelsat W2 16°E 95 cm 483 SNAI SAT 12608 / 27500 / H
7 Turksat 1C 42°E 80 cm 566 TRT1 11096 / 27500 / V
8 Astra 28 28,2°E 60 cm 363 BBC 1 10773 / 22000 / H
9 Hispasat 1A 30°W 80 cm 513 TV GALICIA 11811 / 27500 / V
10 Arabsat 2A3A 26°E 120 cm 529 Kuwait 11747 / 27500 / V
11 Sirius 2 5°E 80 cm 501 Moscow o. w. 12380 / 27500 / H
12 Eutelsat W3 7°E 85 cm 503 M6 Suisse 11283 / 27500 / V
To Next Page
Loading...