Need help?Do you have a question about the Meyer Sound PSW-2 and is the answer not in the manual?
General| Type | Powered Subwoofer |
|---|---|
| Audio Input Type | Balanced |
| Audio Input Connector | XLR |
| AC Power Connector | IEC |
| Voltage Selection | Automatic, based on input voltage |
| Enclosure Finish | Black textured |
| Enclosure Type | Vented |
| Maximum SPL | 126 dB |
| Driver | 2 x 12-inch |
Explains symbols indicating dangerous voltages and risk of electric shock.
Explains symbols for important operating instructions.
Explains symbols related to the unit's frame, chassis, and earth ground.
Explains auto-voltage selection and protective features.
Details the safe operating voltage windows for the unit.
Describes unit behavior during brown-outs and over-voltage.
Guidance for inactive Active LED and audio response problems.
Defines continuous RMS, burst RMS, and peak current.
Instructions for power cord connection and grounding safety.
Warnings regarding liquids and exposure to heat.
Explains the TPL system and its benefits for driver protection.
How TPL limits power and the Sub Limit LED indication.
Specifies cabinet weight and maximum rigging load.
Important safety advice for rigging operations.
Discusses coupling with surfaces and flown cluster placement.
Polarity for coplanar mid-hi and subwoofer configurations.
Using RMS and TPL LED for driver status and diagnosis.
Tests for polarity within and between cabinets.
Why correct polarity is critical for system performance.
Electrical safety and handling advice in English.
To Next Page
