SAFETY SUPPLEMENT
ATTENTION INSTALLERS/OPERATORS FOR YOUR PROTECTION:
1. Read and understand the Operating Manual accompanying this equipment before
performing any work.
2. Additional safety label kits are available from Meyer upon request at no charge.
This is part of our effort to ensure this equipment is installed, operated and
a potential for injury could occur.
3. Under no circumstances should this equipment be installed or operated in a
manner that permits access to the interior of the vacuum.
4. Inlet and Outlet connections must always have collection device or hose attached.
6. Always shut off unit and remove key before performing any work.
7. Always keep loose clothing, hands, feet or any parts of your body, tools and/or any
foreign objects away from the inlet and outlet of the vacuum.
shutting the vacuum down and removing the key.
9. Consult the Meyer factory if you have any questions regarding the proper
installation, operation and maintenance of this equipment.
Wm. W. Meyer & Sons, Inc.
Website: http://www.meyervacuums.com
File # 291-N-002
Eecve 11-1-2015
To Next Page
Loading...
