3
产品使用注意事项 Usage Attentions
安装注意 Installation Attentions
1. 在焊接大电流连接器时，一定要注意焊接线序要相互对应，以免烧毁
电调、舵机。
1. Pay attention to the welding wires sequence which should be
corresponding to each other during the welding of large current connector.
Or maybe ESC and servo suffered burning-out.
2. 副翼和尾翼推荐使用银燕 ES3054 数字舵机，或者其他相同尺寸的舵
机，便于舵机安装和尾翼快拆装置的安装。
2. We recommend the EMAX ES3054 metal digital servo,or other same size
servo for the easy installing of servo and tail wings quick release devices.
3. 在安装电机座时注意调至水平。
3. Please adjust the front and rear motor frame to the level during
installation.
4. 奋斗者电源供电方案请参考下图。
4. Please refer to below the Fighter power supply conceptual drawing when
you were confused by the Installing sequence.
To Next Page
Loading...