MG 40 Series - Installation

1140DCT EM-9538-B Rev.5
MG CO., LTD. www.mgco.jp
5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
1.5.3 INSTALLATION
(1) Remove the mounting brackets.
(a) Flip a tab of a bracket.
(b) Then pull the bracket toward the terminal block to remove it.
(2) Insert the unit into the panel cutout.
(3) Push the mounting brackets into the grooves on both sides of the rear module, until they hit the panel’s rear side.
Bracket
Tab
(a)
(b)
Panel
Panel
Bracket
Fixing groove