MG 40 Series - Wiring Power

1540DCT EM-9538-B Rev.5
MG CO., LTD. www.mgco.jp
5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
1.6.6 WIRING POWER
Connect power according to the power input code. The power specications are shown in the
following table.
CODE RATING PERMISSIBLE RANGE
K3 100 to 120 V AC 85 to 132 V AC, 47 – 66 Hz approx. 3.0 VA
L3 200 to 240 V AC 170 to 264 V AC, 47 – 66 Hz approx. 4.2 VA
R 24 V DC ±20% approx. 1.0 W
IMPORTANT
• For safety, make sure that wiring is performed by qualied personnel only.
• In order to prevent potential electric shock, wire the unit after turning off the power supply and making sure that the
power is not supplied to the cable.
• Use wires as thick as possible and twist them from the end.
• For DC power, conrm the polarity.
Power
+
‒
AC power
DC power
10
9
U(+) V(–)