MG 40 Series - Mounting;Removing Front Panel

1840DCT EM-9538-B Rev.5
MG CO., LTD. www.mgco.jp
5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
2.1.3 MOUNTING/REMOVING FRONT PANEL
• Set parameters with the buttons inside the front panel. Remove the panel in setting.
• Mount the panel after conguration.
■ REMOVING FRONT PANEL
(1) Hold up the front panel.
(2) Remove the panel from downside.
■ MOUNTING FRONT PANEL
(1) Insert the front panel hook into the case upside slots of the unit.
(2) Push the panel hook into the case downside slots of the unit.
NOTE
• Be sure to conrm the direction of the front panel in mounting.
• Make sure that there is no misalignment or space between the unit and the panel after mounting.
Slot
Hook