3440DCT EM-9538-B Rev.5
MG CO., LTD. www.mgco.jp
5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
4
Press SHIFT button to show the setting and SCALE/↑ button to shift
the display into the setting standby mode.
• The forth digit starts blinking, to which you can apply changes.
5
Press DISP/↓ or SCALE/↑, and UP buttons to set to ‘300.0’.
• Press D
ISP/↓ or SCALE/↑ button to go to the next digit, and UP button to
change the blinking value.
NOTE
• ‘300.0’ is a display example. Set any value within the range of -9999 to 9999.
• The negative sign (-) must be set together with the 4th digit. For example, set ‘-04.00’ instead of ‘-4.00’.
6
Press SHIFT button to apply the new setting.
• And the setting item is indicated.
7
Hold down DISP/↓ or SCALE/↑ button for 1 second or more to return to Measuring Mode.
Blinking
Blinking
To Next Page
Loading...
