1643DV2 EM-9422-B Rev.3
MG CO., LTD. www.mgco.jp
5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
1.6.8 INSTALLING/SEPARATING TERMINAL BLOCK
■ INSTALLING TERMINAL BLOCK
The 2-piece screwless spring terminal block is separable. Conrm the direction and insert the terminal block.
■ SEPARATING TERMINAL BLOCK
Pinch right and left sides of the terminal block to pull out, or insert the minus tip of a screwdriver into both side spaces
alternately between the body and the terminal block (terminal No. 1 and 7 sides) to remove.
IMPORTANT
Be sure to turn off the power supply and input signal before installing/separating the terminal block.
Separable screwless spring terminal
To Next Page
Loading...
