MG 43 Series - Step 1. Display Scaling Value a; Display Scaling List

2643DV2 EM-9422-B Rev.3
MG CO., LTD. www.mgco.jp
5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
4.1 STEP 1. DISPLAY SCALING VALUE A
4.1.1 DISPLAY SCALING LIST
Display scaling default values per input code and setting ranges (display ranges) are as shown in the following tables.
■ VOLTAGE INPUT
INPUT SIGNAL DEFAULT VALUE SETTING RANGE
S4: 0 – 10 V DC
Display scaling value A:
Display scaling value B:
to
S5: 0 – 5 V DC
Display scaling value A:
Display scaling value B:
S6: 1 – 5 V DC
Display scaling value A:
Display scaling value B:
S0: specify voltage Display scaling value A: 0% of specied range
Display scaling value B: 100% of specied range
■ CURRENT INPUT
INPUT SIGNAL DEFAULT VALUE SETTING RANGE
SA: 4 – 20 mA DC
Display scaling value A:
Display scaling value B:
to
SB: 0 – 20 mA DC
Display scaling value A:
Display scaling value B:
SC: 0 – 10 mA DC
Display scaling value A:
Display scaling value B:
SG: 0 – 1 mA DC
Display scaling value A:
Display scaling value B:
SJ: 0 – 5 mA DC
Display scaling value A:
Display scaling value B:
SZ: specify current Display scaling value A: 0% of specied range
Display scaling value B: 100% of specied range