MG 43 Series - Step 3. Decimal Point Position; Decimal Point Position List

3143DV2 EM-9422-B Rev.3
MG CO., LTD. www.mgco.jp
5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
4.3 STEP 3. DECIMAL POINT POSITION
4.3.1 DECIMAL POINT POSITION LIST
Default values of decimal point position are as shown in the following tables.
■ VOLTAGE INPUT
INPUT SIGNAL DEFAULT VALUE
S4: 0 – 10 V DC
2 decimal places (10
-2
)
S5: 0 – 5 V DC
2 decimal places (10
-2
)
S6: 1 – 5 V DC
2 decimal places (10
-2
)
S0: specify voltage Decimal point position of specied range
■ CURRENT INPUT
INPUT SIGNAL DEFAULT VALUE
SA: 4 – 20 mA DC
2 decimal places (10
-2
)
SB: 0 – 20 mA DC
2 decimal places (10
-2
)
SC: 0 – 10 mA DC
2 decimal places (10
-2
)
SG: 0 – 1 mA DC
3 decimal places (10
-3
)
SJ: 0 – 5 mA DC
3 decimal places (10
-3
)
SZ: specify current Decimal point position of specied range