3843DV2 EM-9422-B Rev.3
MG CO., LTD. www.mgco.jp
5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
7.1 OPERATING PROCEDURE
NOTE
The following gures are display examples. The displays
depend on the settings.
1
Hold down DI button for 3 seconds or more to move on to Display
Setting Mode.
• The moving average sampling No. is indicated.
NOTE
‘AOFF’, ‘A 2’, ‘A 4’, ‘A 8’ or ‘A 16’ is indicated depending on the setting.
2
Press SF or UP button to select.
• Select one among ‘AOFF’, ‘A 2’, ‘A 4’, ‘A 8’ and ‘A 16’.
NOTE
With the version 1.00, ‘A 16’ is not selectable.
3
Press DI or SC button to apply the new setting.
• And the next parameter setting is indicated.
NOTE
• Press DI button, and the brightness ‘C 1’, ‘C 2’, ‘C 3’, ‘C 4’ or ‘C 5’ will be indicated depending on the setting.
• Press S
C button, and the version indication will be indicated.
4
Hold down DI or SC button for 1 second or more to return to Measuring Mode.
1,3,
4
3,4
2
2
Blinking
To Next Page
Loading...
