4043DV2 EM-9422-B Rev.3
MG CO., LTD. www.mgco.jp
5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
8.1 OPERATING PROCEDURE
NOTE
The following gures are display examples. The displays
depend on the settings.
1
Hold down DI button for 3 seconds or more to move on to Display
Setting Mode.
• The moving average sampling No. is indicated.
NOTE
‘AOFF’, ‘A 2’, ‘A 4’, ‘A 8’ or ‘A 16’ is indicated depending on the setting.
2
Press DI or SC button to go to the brightness setting.
• The brightness is indicated.
NOTE
‘C 1’, ‘C 2’, ‘C 3’, ‘C 4’ or ‘C 5’ is indicated depending on the setting.
3
Press SF or UP button to select.
• Select one among ‘C 1’, ‘C 2’, ‘C 3’, ‘C 4’ and ‘C 5’.
1,2,
4,5
2,4,
5
3
3
Blinking
To Next Page
Loading...
