MG 43 Series - Confirming Firmware Version; Operating Procedure

5243DV2 EM-9422-B Rev.3
MG CO., LTD. www.mgco.jp
5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
12.3 CONFIRMING FIRMWARE VERSION
The rmware version of the unit can be conrmed.
Conrm the version in the following cases:
• The display is different from the one described in the operating manual.
• The rmware version is necessary to consult us for troubles.
12.3.1 OPERATING PROCEDURE
1
Hold down DI button for 3 seconds or more to move on to Display
Setting Mode.
• The moving average sampling No. is indicated.
NOTE
‘AOFF’, ‘A 2’, ‘A 4’, ‘A 8’ or ‘A 16’ is indicated depending on the setting.
2
Press DI or SC button to go to the version indication.
• The rmware version number is indicated.
NOTE
The displays depend on the rmware version number.
3
Hold down DI or SC button for 1 second or more to return to Measuring Mode.
1,2,
3
2,3