105
Preventive Maintenance Schedule for Normal Operation
1
Month
6
Month
1
Year
2
Year
3
Year
4
Year
5
Year
6
Year
7
Year
8
Year
Maintenance Operations
Replacement
Frequency: Km /
year whichever is
earlier
1000
5000
10000
20000
30000
40000
50000
60000
70000
80000
Vehicle Interior and Exterior
Check the tread depth to see if the tyre is worn or damaged abnormally.
Check the four-wheel alignment data.
Perform Tire rotation *( 24 Months or 20,000 km)
Inspection only I I I I I I I I I I
Check the tyre pressure and make adjustment as necessary. Inspection only I I I I I I I I I I
Check if the chassis and underbody bolts and nuts are fastened or fixed, and
replace them as necessary.
Inspection only I I I I I I I I I I
After Maintenance and Repair
Use diagnostic software to reset maintenance interval indicator. Check for
fault codes and determine operation status of the control systems.
Inspection only I I I I I I I I I I
Check the status and function of communication module with the scan tool. Inspection only I I I I I I I I I I
Carry out the road test, and check the status and function of power system,
brake, steering and other systems.
Inspection only I I I I I I I I I I
Symbol Abbreviation : R - Replace • I - Inspect- Top up if require-Adjust-Clean-Rell , L - Lubricate, C- Clean
** Tightening of underbody fasteners, door adjustments and functional checks of all the systems during every service is mandatory - Check and Rectify.
Fluid, Consumables, Grease, Components, Wheel Alignment, Wheel Balancing etc. (but not limited to mentioned) will be replaced on chargeable basis. Periodic Maintenance Schedule is for reference. MG reserves right to
change the Periodic Maintenance Schedule. For latest Schedule, please refer MYMG APP / Website Owner’s Manual.
Maintenance Interval
To Next Page
Loading...
