12
Charging Port Lock Manual Release
There is a cable given inside the front
compartment hood, by pulling it together
with charging gun, the Gun can be extracted
from the vehicle during any malfunctioning or
emergency situations.
Electric Adjusting Outside Rearview
Mirror*
The exterior rearview mirror can be adjusted
through the electric adjustment switch on
the right side of the instrument panel. The
adjustment steps are as follows:
1. Select the rearview mirror to be adjusted.
Press the “L” (left) or “R” (right) button
on the selector switch to display the left
or right rearview mirror to be adjusted.
2. Toggle the rocker to adjust the selected
rearview mirror.
Power Window
When the ignition switch is at the ON
position, control the power window with the
power window switch on the center console.
When the key is turned from the ON
position to the ACC or LOCK position, or
after the key is removed, all windows can still
be controlled by the power window switch
within 30 seconds.
Driver-side Power Window Initialization
Adjustment
In some cases, the one-key up/down of the
driver side window may fail, due to such as
reconnection after battery replacement.
When this occurs, the window needs to
be initialized by programming. First, lift
the driver-side switch until the window is
completely closed, hold it for 5 seconds and
then release it. At this time, the initialization
is completed. If not, please contact the
Aftersales Service Center for maintenance.
Product Information
To Next Page
Loading...
