31
Do not continue driving the vehicle.Please
stop in a safe area as soon as possible to cool
down the motor.
Insulation Fault Indication
It indicates that the vehicle is in danger of
electric leakage.Please contact a local MG
Authorised Repairer for service immediately.
Front Hatch Open Indication
When the front hatch is open or not closed
tightly, the warning lamp lights up.
Co-pilot Seat Belt Not Fastened
Indication
2
The seat belt warning lamp illuminates if
the passenger does not fasten the seat belt
properly after the ignition switch is turned
on. The following circumstances will appear
unless the driver fastens the seat belt
properly.
• The seat belt warning lamp keeps
illuminated.
• If the vehicle speed exceeds 20 km/h, the
warning lamp will flash and the warning
buzzer will buzz for a certain time.
Power Battery Thermal Runaway
Indication
If the warning lamp lights up, a buzzing alarm
sounds in the vehicle and a text message
appears on the instrument that says “Vehicle
is at risk of fire, exit as soon as possible”. This
means the traction battery is overheating
and the vehicle is at risk of fire. You should
pull over as soon as possible, get out of the
vehicle when it stops, withdraw to a safe area
and call for help.
Vehicle Fault Indication
When the power supply switch is in the ACC
position, the warning lamp will be on, and the
READY lamp will light up and then go out.
This indicates that the powertrain is normal.
• In case of the following circumstances,
please consult the nearest Aftersales
Service Center for inspection:.
• This indicator lamp does not illuminate
when the power switch is turned to
“ACC”.
• The lamp does not go out after it
illuminates
• The warning lamp illuminates, the
“READY” indicator lamp turns off, and the
vehicle cannot run.
Product Information
To Next Page
Loading...
