42
and abnormal CAN communication),
only the ESC off indicator will go out and
the other 3 indicators will be on after 3s.
2. If the ESC function is activated during
driving, the ESC indicator will flash to
remind the owner that the ESC system is
running. If the ESC system cannot work
normally when the ABS and EBD systems
work normally, the ESC MIL will be on,
indicating that the ESC system fails. If the
ESC system and ABS system fail while the
EBD system works normally, the ESC
MIL and ABS MIL will be on. If the ESC
system, the ABS system, and the EBD
system fail, the ESC, ABS, and EBD fault
warning lamps will light up.
3. The ESC off indicator is to indicate
that the ESC function is turned off (the
indicator is on when the ESC function
is off, and off when the ESC function is
on). If the owner presses the ESC off
button, some ESC functions will be off
and the ESC off indicator will light up.
When the ESC switch is pressed, the
ESC system starts to work, and the ESC
function will not be disabled immediately
but after the process is completed. If the
owner presses the ESC switch again, the
ESC function will be enabled again. If the
ESC switch is pressed for more than 10
seconds, the ESC system will consider it
as a misoperation (For example, the ESC
switch is accidentally pressed by other
objects) and will not turn off the ESC
function.
4. The ESC system will be activated
automatically after every re-ignition.
Turn off the ESC System*
The ESC function can be turned off by
accessing the vehicle settings menu on the
host. When the ESC function is turned off,
the ESC off indicator lights up. It is generally
not recommended to shut down the ESC
system. The ESC system can be turned off
temporarily only when the vehicle just leaves
muddy ground or climbs a slope in a slippery
area.
Driving and Controls
To Next Page
Loading...
