MG COMET EV 2023 - Page 74

68
Cleaning with a High Pressure Cleaner
Note: Always read the manufacturers
operatinginstructions.
When using high pressure washers, always
ensure there is adequate distance between
the spray nozzle and any soft materials, decals
or rubber seals.
Note:DONOTdirectthepressurewasher
nozzle directly toward the high voltage
charging point or high voltage battery
connections on the underside of the
vehicle.
IMPORTANT
• Please pay attention to the operating
instructions of high-pressure cleaner.
• High pressure cleaners should not be
closely directed at soft parts of the
vehicle.
Polishing and Waxing
Regular polishing can remove residues from
the surface of the vehicle. After polishing, use
high-quality car wax for protection.
Notes
It is forbidden to clean or polish aluminum
trims with automotive or chrome
polishing agent, steam or alkaline soap
liquids.These substances are abrasive and
may damage trims and wheels.
Exterior Bright Metal Parts Protection
Clean the bright metal trims regularly. They
are usually washed with water. When waxing
the vehicle, please also wax these bright
metal parts.
Aluminum Wheels and Wheel Trim
Cover Cleaning
To maintain the original appearance of the
wheel and wheel trim cover (if any), do not
allow them to collect dust or brake dust.
Clean the wheel / wheel trim cover regularly.
Do not use abrasive cleaning agent or brush
that may damage the finish paint.
Notes
Do not use abrasive cleaning agent or
brush to clean aluminum wheels or wheel
trim covers.
Warning
Keep yourself, test leads, clothing and other
objects clear of electrical connections and
hot or moving vehicle parts.
Do not wear watches, rings, or loose
clothing when working in an Front
compartment.
Make sure no loose material (Cloth or
other inflammable material etc) is left (but
not limited to) inside front compartment/
Fender after washing.
Maintenance