MG COMET EV 2023 - The MG MOTOR Anti-corrosion Warranty

85
3.3 Anti-Corrosion Warranty field of
application
3.3.1 In addition to the MG MOTOR New
Vehicle Warranty, MG MOTOR
guarantees the bodywork and sub
frame of MG MOTOR vehicle
Schedule I from perforation from the
interior, due to steel panel corrosion
caused by a manufacturing, material
or protective product application
defect.
3.3.2 This guarantee covers the repair
or replacement of components
with perforated steel panel work
due to a manufacturing, material
or protective product application
defect, acknowledged by the
Manufacturer.
3.3.3 It is authorized MG MOTOR
workshop’s discretion to decide
whether it is appropriate to repair
or replace these components, and to
inform the Customer.
3.4 The MG MOTOR Anti-Corrosion
Warranty does not cover:
3.4.1 any damage which is not covered
by the MG MOTOR New Vehicle
Warranty, as defined at the
start of this booklet; Mechanical
components
which are not an integral part of the
bodywork or sub-frame (wheel rims,
exhaust system, etc.).
3.4.2 In case, repairs (including denting or
painting) have been carried out on
the body of the MG Motor Vehicle
in a workshop outside the MG
MOTOR authorized network.
3.5 Anti-Corrosion Warranty conditions
of application
3.5.1 To obtain the Anti-Corrosion
Warranty, the Customer must
contact any Workshop of the MG
MOTOR Authorized Workshop
Network - only such Workshop
have authorization for operations of
this sort.
3.5.2 The Customer shall show the
duly completed (delivery date and
validation of anti-corrosion test
coupons) the Owner’s Manual as
proof of their warranty entitlement.
3.5.3 Application of the MG MOTOR
Anti-Corrosion Warranty is subject
to the anti-corrosion tests on the
bodywork and sub-frame. Customer
shall ensure that these tests are
conducted at the mileage intervals
stated in the Owner’s Manual,
and at least once every two years.
Scheduled maintenance services
in the MG MOTOR authorized
workshop network incorporate
these tests.
3.5.4 If the Customer requests to have
the anti-corrosion test conducted
independently of the scheduled
maintenance service, the same will
be carried out at an extra cost to the
Customer.
3.5.5 During these tests the Customer
shall make sure that the professional
carrying out the operation correctly
completes the bodywork and sub
frame test coupon, in order to
validate the continuation of the Anti-
Corrosion Warranty.
3.5.6 Repairs on any deterioration must
be made as soon as possible.
3.5.7 The application of the MG MOTOR
Anti-Corrosion Warranty is also
subject to bodywork and sub-
frame repairs being carried out
in accordance with MG MOTOR
recommendations.
3.5.8 The repair or replacement of
components under the conditions
described in the “field of application”
MG Motor New Vehicle Warranty