Automatic Vehicle Hold (AVH) Switch*
Press the AVH switch and the background lamp on the switch illuminates to activate the AVH function. The
parking brake will function, the brake system applies the braking force to park the vehicle.
AVH will only get activated if below conditions are met.
23
The vehicle is motionless and the engine is running.
The brake pedal is depressed to a certain degree.
The driver's seat belt is buckled and the driver's side door is
closed.
"*" indicates that the equipment mentioned is optional. And your vehicle may not have such equipment.
Please refer to the actual vehicle for vehicle configuration. MG Motor India Pvt. Ltd. reserves the copyright of the Manual.
SAFETY
To Next Page
