MG MG6 Series 2011 - Service Procedures; Automatic Transmission-Pressure Test; Neutral Start (Inhibitor)-Switch

T ransmission
T ransmission-A T
ServiceProcedures
Automatictransmission–PressureT est
Test
1.Fullyapplyhandbrakeandchockroadwheels.
2.FitT26001totransmissionpressuretestport.
3.Applyfullpressuretothefootbrakeandmovethe
selectorleverto'D'andthen'R',checkpressureat
idlespeed.
Idlespeed
•D0.35-0.39Mpa(3.6-4.0kgf/cm
2
)
•R0.49-0.61Mpa(5.0-6.2kgf/cm
2
)
Stallspeed
•D1.29-1.41Mpa(13.0-14.3kgf/cm
2
)
•R1.71-1.99Mpa(17.4-20.1kgf/cm
2
)
Neutralstart(inhibitor)–Switch
Remove
1.Disconnecthoseconnectorfromintercoolerto
throttlevalve.
Electric Electric
Electric
Throttle Throttle
Throttle
- -
-
Includes Includes
Includes
Tuning–Remove Tuning–Remove
Tuning–Remove
2.Releaseclipssecuringaircleanertoturbochargerand
moveaside.
3.Remove3boltssecuringaircleanerbrackettobody.
4.Releasetransmissionmultiplugfromairlterbracket
andremovebracket.
5.EnsurevehicleisinNeutral.
6.Releaseselectorarmfromneutralstartswitch,move
armandselectorcableaside.
7.Releaseharnessclipfromboltsecuringinhibitorswitch.
8.Disconnectmultiplugfrominhibitorswitch.
9.Usingascrewdriver,pryoffthelockwasher.
10.Removelockingnut,locktabandrubberwasherfrom
selectorshaft.
Version2.0386