MG MG6 Series 2011 - Neutral Start (Inhibitor)-Switch-Check and Adjust; Transmission and Converter

T ransmission
T ransmission-A T
NeutralStart(Inhibitor)–Switch–Checkand
Adjust
CheckandAdjust
1.Ensureselectorleverisat'N’position.
2.Releaseselectorarmfromneutralstartswitch,move
armandselectorcableaside.
3.FitTPT00001toselectorvalvelever,and
alignTPT00001ngertoneutraldatumline.
4.Positionselectorarmtoneutralstartswitchandensure
correcttting.Fitandtightennutto10–14Nm.
5.Moveselectorleverfrom'P'to'W'andthenreturnto
'P',ensurepositiveselectionofallgears.
6.Checkthattheenginewillstartin'P'or'N'positions
andthattheenginestartisinhibitedwhendrive
positionsareselected.
T ransmissionandConverter
Remove
1.Removeengineandtransmissionassembly.
Engine Engine
Engine
and and
and
Automatic Automatic
Automatic
Transmission–Remove Transmission–Remove
Transmission–Remove
2.DisconnectCKPsensormultiplug.
3.RemoveboltsecuringCKPsensortorearclosureplate
andremovesensor.
4.Remove2boltssecuringrearclosureplateto
transmissionandremoveplate.
5.Markttedpositionoftorqueconvertertodriveplate.
6.Removeanddiscard6boltssecuringtorqueconverter
todriveplate.
Version2.0388