MG MG6 Series 2011 - Reverse Idler Gear

T ransmission-MT
T ransmission
ReverseIdlerGear
Remove
1.Removeanddiscardreverseaccesscover.
2.Removeboltretainingreverseidlershaft,discard
washer.
3.Removereverseidlergearfromtransmissionhousing.
4.Removecirclipsecuringreverseidlergeartoshaftand
discardcirclip.
5.Removethrustwasher,needlerollerbearingfrom
reverseidlershaft.
Ret
1.Lubricatebearingswithcleanoil.
2.Fitneedlebearing,reverseidlergearandthrustplate
toreverseidlershaft.
3.Securereverseidlergeartoreverseidlergearshaft
withanewcirclip.
4.Positionreverseidlergearintorearhousing.
5.Fitreverseidlershaftboltandtightento32–44Nm.
Useanewwasher.
6.Applyabeadof1598blacksiliconesealanttoreverse
accesscover.
7.Fitnewreverseaccesscoverandtightensecuringbolts
to10–14Nm.
Version2.0425