MG MG6 Series 2011 - Control Assembly

T ransmission-MT
T ransmission
ControlAssembly
Remove
1.Removetransmissionassembly.
Manual Manual
Manual
Transmission Transmission
Transmission
Assembly–Remove Assembly–Remove
Assembly–Remove
2.Removeboltsfrominterlockassembly.
3.Removeboltssecuringcontrolassemblytotransmission
assembly.
4.Removecontrolassembly.
5.Removeboltssecuringgearselectorlevertocontrol
assembly.
6.Removegearselectorlever.
7.Usingasuitablepunchtoremoverollpin,removethe
shiftandselectorshaft.
8.Removeboltssecuringreverselockthrustplate.
9.Removereverselockthrustplate.
10.Remove5th/Reversereturnspring.
11.Removeinterlockassemblygearshiftarmguide.
12.Removereverselockselector .
13.Remove1st/2ndgearreturnspring,returnspringthrust
plate.
14.Removeanddiscardneedlerollerbearing.
15.Removeanddiscardoilseal.
16.Removegearshiftlever.
17.Removenylonblock.
18.Removeanddiscardbreatherplug.
Ret
1.UsingT24017,trollpin.
2.UsingT24024,tshaftofreverselockselector.
3.Assemblereverselockselectorassembly.
4.Fitnewbreatherplugtocontrolassembly.
5.UsingT24016,tgearshiftandselectorshaftoilseal.
Caution:T akecaretoavoiddamagingtheoilseallip,
whilettingit.
6.UsingT24015,tnewneedlerollerbearing.
7.Fitreverselockthrustplateandtightenboltsto
18–26Nm
Version2.0427