MG MG6 Series 2011 - Clutch Slave Cylinder (B); Clutch System Bleeding

Clutch
T ransmission
ClutchSlaveCylinder(B)
Remove
1.Drainbrakeuidfromreservoir.
Caution:Brakeuidwilldamagepaintnishedsurfaces.
Ifspilled,immediatelyremoveuidandcleanareawith
water.
2.Removeundertray.
Undertray–Remove Undertray–Remove
Undertray–Remove
3.Removeclipsecuringclutchslavecylinderhoseto
bracketanddisconnectpipeunion.
4.Loosen2nutssecuringclutchslavecylindertobracket.
5.Removeclutchslavecylinder.
Ret
1.Positionslavecylinderpushrodagainstclutchrelease
arm.
2.Fitslavecylindertobracketandtightennutsto
20–25Nm.
3.Positionslavecylinderhoseandtightenunionto
15–19Nmsecurehosewithaclip.
4.T opupuidlevelinbrakereservoirto'MAX'mark.
5.Bleedtheclutchsystem.
Clutch Clutch
Clutch
System System
System
Bleeding Bleeding
Bleeding
ClutchSystemBleeding
Bleed
Bleedingofthehydraulicsystemisonlypermissibleifaclutch
pipeorhosehasbeendisconnected.Ensuretheuidinthe
reservoirismaintainedbetweentheminimumandmaximum
levelsthroughoutthebleedprocedureanduseonlynewuid.
Warning:Donotallowbrakeuidtocomeintocontact
witheyesorskin.
Caution:Neverreusebrakeuidthathasbeenbledfrom
theclutchoperatingsystem.
1.Removeundertray.
Undertray–Remove Undertray–Remove
Undertray–Remove
2.Removedustcapfromnipple,positionbleedbottleand
connecthosetobleednipple.
3.Depressclutchpedaltooorandhold.
4.Loosenbleednippleandallowairanduidtoescape.
5.Tightennipple.
6.Returnclutchpedaltofullyreleasedposition.
7.Repeatprocessuntilbubblefreeuidemerges.
Depressclutchpedaltooorandhold,tightennipple
to
12–17Nm.
8.Removebleedbottleanddisconnecthosetobleed
nipple,tductcap.
9.T opupuidlevelinbrakereservoirto'MAX'mark.
10.Fitundertray.
Undertray–Refit Undertray–Refit
Undertray–Refit
Version2.0445