MG MG6 Series 2011 - Pipe - Steering Rack to Oil Cooler

FrontWheelSteering
SteeringSystem
Caution:T opreventdamagetocomponents,usetwo
spannerswhenlooseningortighteningunions.
Caution:Alwaystplugstoopenconnectionstoprevent
contamination.
8.Removefeedpipefromenginecompartment.
Ret
1.Cleanpipeendsandmatingfaces.
2.Positionfeedpipeinenginecompartment.
3.Usingnewsealingwashers,positionpipetopump,
removeplug,tunionandtightento38–42Nm
Caution:T opreventdamagetocomponents,usetwo
spannerswhenlooseningortighteningunions.
4.Usingnewsealingwashers,positionpipetosteering
rack,removeplug,tunionandtightento26–30Nm
Caution:T opreventdamagetocomponents,usetwo
spannerswhenlooseningortighteningunions.
5.Fitundertray.
Understray Understray
Understray
Refit Refit
Refit
6.Removecontainer.
7.ConnectPASpressuresensormultiplug.
8.Connectbatteryearthlead.
9.Bleedpowersteeringsystem.
Power Power
Power
Assisted Assisted
Assisted
Steering Steering
Steering
System System
System
Bleeding. Bleeding.
Bleeding.
Pipe-SteeringRackT oOilCooler
Remove
1.Disconnectbatteryearthlead.
2.Raisevehicleonlift.
3.Removeundertray.
Undertray Undertray
Undertray
Remove Remove
Remove
4.Positioncontainertocollectspillage.
5.Releaseclipsecuringreturnpipetooilcoolerand
disconnectpipefromoilcooler.
Caution:Alwaystplugstoopenconnectionstoprevent
contamination.
6.Remove2screwssecuringpipetosubframe.
7.Removeunionsecuringpipetosteeringrack,remove
anddiscardwashers.
Caution:Alwaystplugstoopenconnectionstoprevent
contamination.
8.Removepipefromenginecompartment.
Ret
1.Cleanpipeendsandmatingfaces.
2.Positionpipeinenginecompartment.
3.Removeplugfromsteeringrack.
4.Usingnewsealingwashers,positionpipetosteering
rack,removeplug,tunionandtightento26–30Nm
Version2.0531