MG MG6 Series 2011 - Link-Anti Roll Bar; Hub Bearing-Rear

SuspensionSystem
RearSuspension
Link-AntiRollBar
Remove
1.Raisethevehicleonalift.
2.Removeroadwheel.
Wheel Wheel
Wheel
Remove Remove
Remove
3.Useanopenendedspannerontheatsmachinedon
theanti-rollbarlinktopreventballstudfromrotating.
Removenutandreleaseanti-rollbarlinkfromantiroll
bar.Removenutandreleaseanti-rollbarlinkfrom
anti-rollbar.
4.Useanopenendedspannerontheatsmachinedon
theanti-rollbarlinktopreventballstudfromrotating.
Removenutandreleaseanti-rolllinkfromtrailingarm.
5.Removeanti-rollbarlink.
Ret
1.Fitanti-rollbarlinktotrailingarm,tnutandtighten
to50–65Nm.
2.Fitanti-rollbarlinktoanti-rollbar,tnutandtighten
to50–65Nm.
Caution:Nutsandboltsmustbetightenedwithweightof
vehicleonsuspension.
3.Fitroadwheel.
Wheel Wheel
Wheel
Refit Refit
Refit
4.Lowerthevehicle.
HubBearing-Rear
Remove
1.Raisethevehicleonalift.
2.Removerearwheel.
Wheel Wheel
Wheel
Remove Remove
Remove
3.Remove2boltssecuringcaliperassemblytotrailing
arm,releasecaliperassemblyandtieaside.
Caution:Donottiebrakecaliperonbrakehose.
4.Removecountersunkscrewsecuringbrakedisc.
5.Removebrakedisc.
6.Removeanddiscardcapfromhub.
Version2.0584