MG MG6 Series 2011 - Member Front End Panel

BodySystems
FrontClosures
MemberFrontEndPanel
Remove
1.Removefrontbumper.
FrontBumperRemove
2.Remove2screwssecuringairlterintaketomember
frontendpanel.
3.Remove2upperboltsandloosen2lowerbolts
securingmemberfrontendpanelbracketstothepanel.
4.Remove4boltssecuringmemberfrontendpanelto
body.
5.Remove4boltssecuringbothbonnetlockstomember
frontendpanel.
6.Raisememberfrontendpanelfrombody,releaseclips
securingbonnetsafetycatchcablecouplertothepanel.
Removememberfrontendpanel.
7.Removeradiatormountingrubbersfrombonnet
memberfrontendpanel.
Ret
1.Fitradiatormountingrubberstomemberfrontend
panel.
2.Positionmemberfrontendpaneltobodyandsecure
cableinclips.
3.Positionbothbonnetlockstomemberfrontendpanel,
tboltsandtightento7–10Nm
4.Fitboltssecuringmemberfrontendpaneltobodyand
tightento7–10Nm
5.Positionbonnetmemberfrontendpanelbracketsto
thepanelt2boltsandtightento7–10Nm
6.Fitscrewssecuringairlterintaketomemberfront
endpanel.
7.Checkbonnetalignmentandoperationofbonnetlocks
andsafetycatch.
8.Fitfrontbumper.
FrontBumperRet
Version2.0798