MG MG6 Series 2011 - Cylinder Head Gasket Overhaul - with Engine Removed

EngineMechanical-1.8T
Engine
8.Fitboltsfromywheeltohydraulictorqueconvertand
tightento25–35Nm.
9.FitboltsfromLHandRHclosingpaneltoauto
transmissionhousingandtightento22–28Nm.
CylinderHeadGasketOverhaul-withEngine
Removed
Remove
1.Removeanddiscardcamshaftdrivebelt.
Camshaft Camshaft
Camshaft
Drive Drive
Drive
Belt Belt
Belt
2.Removecamshaftcover.
Camshaft Camshaft
Camshaft
Cover Cover
Cover
Gasket Gasket
Gasket
3.Removeupperandloweralternatorxingsandremove
alternator.
4.Removenutsecuringheatshieldtoupperbracket.
Removeboltandstudsecuringalternatorupper
brackettocylinderheadandremovebracket.
5.Remove3boltssecuringcompressortolowerbracket
andremovecompressor.
Version2.073