MG ZS Series - License Plate Lamp Bulb Renewal

EMERGENCYINFORMA TION
RearSideLightBulbRenewal
1Openthetailgate.
2Disconnectthebatterynegativeterminal.
3Usingasuitableprybarorlever,carefullyremove
thecovertrim.
4Usingasuitable10mmspanner/socketwrench,
removethe3screws(1)securingthelamptothe
tailgate.Removethewiringconnector(2).Release
thelampassemblyandremoveawayfromthebody.
0
0
0
5Rotatethebulbholder(2)inananti-clockwise
direction.
0
0
0
0
0
0
0
0
6Removebulbholderandremovebulb.
7Fitnewbulbtobulbholder.
8Insertbulbholderinlampassembly,rotateclockwise
untilfullysecure.
9Ensurelampsealiscorrectlylocated.
10Positionlamptotailgate,retthewiringconnector
andthescrewxings,andtightento3-5Nm.
11Retscrewcovertrim.
271
5