What to do if my MHC Medical Products Blood Pressure Monitor displays “Err 2”?
If your MHC Medical Products Blood Pressure Monitor displays “Err 2”, it could be due to movement during the measurement or signal interference. To resolve this, remain still while taking a measurement. Also, remove any potential sources of interference, such as mobile phones or magnets, from the vicinity.
Why is there no display when I press the Power /Start button on my MHC Medical Products Blood Pressure Monitor?
If your MHC Medical Products Blood Pressure Monitor shows no display when you press the Power/Start button, it might be due to depleted batteries or incorrect battery polarity. Try replacing the batteries with new ones, ensuring they are aligned with the correct polarities.
What to do if my MHC Medical Products SureLife Classic SL-BW101 Blood Pressure Monitor displays “Err 3”?
If your MHC Medical Products Blood Pressure Monitor displays “Err 3”, it means the results were incorrect. The suggested solution is to measure again.
What to do if my MHC Medical Products Blood Pressure Monitor displays “Err P”?
If your MHC Medical Products Blood Pressure Monitor displays “Err P”, this indicates a failure to inflate. The suggested solution is to return the device for servicing.
What to do if my MHC Medical Products SureLife Classic SL-BW101 displays “Err 1” on my MHC Medical Products SureLife Classic SL-BW101?
If your MHC Medical Products Blood Pressure Monitor displays “Err 1”, it means that it deflated too rapidly. The suggested solution is to return the device for servicing.
General| Brand | MHC Medical Products |
|---|---|
| Model | SureLife Classic SL-BW101 |
| Category | Blood Pressure Monitor |
| Language | English |
To Next Page
