04
Precautions
Please fully charge this power bank before using it for the first time.
Use an appropriate charger and USB cable (Mi brand products are recommended)
when charging the power bank or using it to charge other devices.
Do not leave this power bank unaended while charging, and unplug it from the
power supply before going out or leaving it unaended for a long time.
Once this power bank is fully charged, or aer it is used to fully charge another
device, unplug the charging cable in a timely manner to prevent damage.
When the baery level is not displayed aer pressing the buon, it may be because
the power bank is in protective mode. Try plugging in an external charger to restore
the power bank.
When not using this power bank for a long time, please keep its baery level in the
range of about 25–50%, and store it in a cool and dry environment. Avoid long-term
storage when the power bank is fully charged or empty, so as to extend its baery life.
Specifications
Model: PLM13ZM Baery Type: Lithium polymer baery
Cell Capacity: 37 Wh 3.7 V (10000 mAh) Rated Capacity: 5500 mAh (5.1 V/2.6 A)
Operating Temperature: 5°C to 35°C Item Dimensions: 147.8 × 73.9 × 15.3 mm
Input Port: Micro-USB/USB-C Output Port: USB-A
Input:
5 V=2.1 A / 9 V=2.1 A / 12 V=1.5 A (Charging the power bank via Micro-USB/USB-C);
5 V=2.4 A (Charging the power bank via Micro-USB/USB-C, while charging a device via
one of the USB-A ports at a current of 2.4 A);
5 V=2.6 A (Charging the power bank via Micro-USB/USB-C, while charging two devices
via both USB-A ports at a current of 2.6 A)
Output: (Single-port USB-A) 5.1 V=2.4A 9 V=2 A 12 V=1.5 A
(Dual-port USB-A) 5.1 V=2.6 A
Charging Time:
Approx. 4 hours (with the included USB cable, and 9 V/2 A, 12 V/1.5 A charger)
Approx. 6 hours (with the included USB cable, and a 5 V/2 A charger)