Mi Redmi Smart Pen - Pairing and Charging; Device Safety and Warnings; CAUTION; Important Safety Information

Thank you for choosing
Redmi Smart Pen
This product is compatible with
Redmi Pad Pro / Redmi Pad Pro 5G
For more compatibility information, visit our
official website: www.mi.com/global/service/
userguide
Pairing and Charging
This device is paired with the tablet via
Bluetooth: press and hold the Primary or
Secondary buon for 3 seconds, click to
connect upon receiving the Bluetooth pop-up
window on the tablet.
Charge your device with a USB Type-C charger.
For more information, visit our official website:
www.mi.com/global/service/userguide
WEEE
Special precautions must be
taken to safely dispose of
this product. This marking
indicates that this product
may not be discarded with
other household waste in the EU.
To prevent harm to the environment
or human health from inappropriate
waste disposal, and to promote
sustainable reuse of material
resources, please recycle responsibly.
To safely recycle your device, please
use return and collection systems or
contact the retailer where the device
was originally purchased.
CAUTION
RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO INSTRUCTIONS.
Additional safety information and
precautions can be accessed at
the following link: www.mi.com/en/
certification
Important Safety Information
Read all safety information below
before using your device:
• Use of unauthorized cables, power
adapters, or baeries can cause fire,
explosion, or pose other risks.
• Use only authorized accessories which are
compatible with your device.
• Aer charging is complete, disconnect
the adapter from both the device and the
power outlet. Do not charge the device for
more than 12 hours.
• This device’s operating temperature range
is 0°C to 40°C. Using this device in an
environment outside of this temperature
range may damage the device.
• If your device is provided with a built-in
baery, to avoid damaging the baery or
the device, do not aempt to replace the
baery yourself.
• The baery must be recycled or disposed
of separately from household waste.
Mishandling the baery may cause fire or
explosion. Dispose of or recycle the device,
its baery, and accessories according to
your local regulations.
• Do not disassemble, hit, crush, or burn the
baery. If the baery appears deformed or
damaged, stop using it immediately.
- Do not short circuit the baery, as
this may cause overheating, burns, or
other injury.
- Do not place the baery in a high-
temperature environment.
- Overheating may cause explosion.
- Do not disassemble, hit, or crush the
baery, as this may cause the baery to
leak, overheat, or explode.
- Do not burn the baery, as this may
cause fire or explosion.
- If the baery appears deformed or
damaged, stop using it immediately.
• User shall not remove or alter the baery.
Removal or repair of the baery shall only
be done by an authorized repair center of
the manufacturer.
• Keep your device dry.
• Do not try to repair the device yourself.
If any part of the device does not work
properly, contact Mi customer support
or bring your device to an authorized
repair center.
• Connect other devices according to their
instruction manuals. Do not connect
incompatible devices to this device.
• Your device is not a toy. As with all
electrical products, precautions should
be observed during handling and using of
electrical products to reduce the risk of
electric shock. If parents choose to allow
children to use the device, they should
caution his or her child about the potential
02