STEP 5
Then holding the handle in the center of the bike and lift
the kickstand
Then lift and rotate the front wheel of the bike slowly
towards the rear wheel until they both meet.
(The bike can now be supported by the metal
Stand situated under the bottom bracket.)
.
STEP 3
Fold handlebars to the side of the bike frame as shown in the
picture.
(Pay attention not to force cabling. The cables .should fall in front
or behind the stem when folded, not forced over the folding
mechanism.)
.
STEP 4 (frame)
Release the 'safety catch' mechanism in
picture 1 by lifting it upwards.
Then pull the quick release lever towards
the rear of the bike to unlock the frames
folding mechanism.
To Next Page
Loading...