Constant Frequency Protocols
• The model M1 can generate a several constant output pulse frequencies. For most applications I
recommend the use of one of the four standard protocols (B5-C5, P2, A9, Omni-8) to avoid tissue
accommodation which can reduce the tissue response over time if a stimulus signal is monotonic
and unchanging.
• The list has the most commonly used single frequencies, including:
• 1 pps
• 2 pps
• 3 pps
• 4 pps
• 5 pps
• 10 pps
• Some people have good scientific reason to believe that one or more of these specific pulse
frequencies may be of benefit for specific applications. As a scientist I remain skeptical, and I am
not a clinician, so I can not give specific advice on which frequencies to use for which condition.
• Using the model M1 you may experiment for yourself.
To Next Page
Loading...