TMM-640 VoIP Touchscreen Master Module
Document IM-TMM-640-1.2 2010-2013 Harding Instruments - Printed in Canada
INSTALLATION
MicroComm DXL
INSTRUCTIONS
Table of Contents
1. Intent & Scope 3
2. Description 3
3. Ethernet Connection 4
4. Handset Connector (or external push-to-talk switch) 5
5. Power Supply 5
6. Configuring a TMM-640 with the Administrator Software 5
7. Setting the IP Address for the TMM-640 8
8. Using a web browser to configure the TMM-640 9
8.1 Using the MicroComm Setup Wizard 9
8.2 Setting the TMM-640 Operating Parameters 15
9. Using the DXL VOIP Device Manager to Configure Multiple Masters 23
To Next Page
Need help?
General
