microjig ZEROPLAY - Step 1 - Cut Zero-Clearance Inserts

Next, cut (six) 6” wide x 24“ long strips of 1/2” thick, void-free plywood. These will
be the interchangeable zero-clearance inserts (PARTS Z1-Z6).
Z1
1/8” kerf
@ 90 degrees
1/8” kerf
@ 45 degrees
thin kerf
@ 90 degrees
thin kerf
@ 45 degrees
3/8” dado
@ 90 degrees
1/4” dado
@ 90 degrees
Z2 Z3 Z4
Z5 Z6
3
CONTINUED