To Next PageTo Next Page
Need help?Do you have a question about the Microlab FC330 and is the answer not in the manual?
Explains graphical symbols used in the manual to indicate potential hazards.
Lists critical safety and operating instructions to prevent hazards and ensure proper use.
Describes the product's key features, including subwoofer technology and design philosophy.
Lists technical specifications such as power output, frequency response, and driver unit details.
Details the process of unpacking the speaker system from its packaging and lists included items.
Describes the front panel controls and features of the subwoofer, including volume control.
Details the rear panel connections and indicators on the subwoofer, such as audio inputs/outputs.
Provides step-by-step instructions for connecting the satellite speakers and audio sources.
General| Tweeter | Yes |
|---|---|
| Speaker type | 2-way |
| Number of drivers | 3 |
| Speaker placement | Tabletop/bookshelf |
| Audio output channels | - channels |
| Woofer diameter (imperial) | 5.25 \ |
| Tweeter diameter (imperial) | 3 \ |
| RMS rated power | 56 W |
| Housing material | MDF |
| Recommended usage | PC |
| Remotely operated | No |
| Signal-to-Noise Ratio (SNR) | 80 dB |
| Frequency range | 35 - 20000 Hz |
| Channel separation | 52 dB |
| Sound enhancement technology | X-bass |
| Subwoofer dimensions (WxHxD) | 205 x 275 x 250 mm |
| Surround speaker dimensions (WxHxD) | 110.5 x 132.5 x 195 mm |
| Connector(s) | 4 |
| Connectivity technology | Wired |
| Power source type | AC |
| Speaker interface type | RCA |
Weight and Dimensions| Weight | 7800 g |
|---|
