Microlife NC 200 User Manual

Microlife NC 200 NC 200Guarantee Card
9
AT
AK
AL
AM
AN
AO
AP
AQ
AR
AS
BT
BK
BL
BO
BP
BR
BS
BQ
BM
BN
2
1
3
4
6
8
5
7
Name of Purchaser
Imię i nazwisko nabywcy
Serial Number
Numer seryjny
Date of Purchase
Data zakupu
Specialist Dealer
Przedstawiciel
2
Read the instructions carefully before using this device.
Type BF applied part
This Microlife thermometer is a high quality product incorporating
the latest technology and tested in accordance with international
standards. With its unique technology, this device can provide a
stable, heat-interference-free reading with each measurement.
The device performs a self-test every time it is switched on to
always guarantee the specified accuracy of any measurement.
This Microlife thermometer is intended for the periodic measure-
ment and monitoring of human body temperature.
This thermometer has been clinically tested and proven to be
safe and accurate when used in accordance to the operating
instruction manual.
Please read through these instructions carefully in order for you to
understand all functions and safety information.
Table of Contents
1. The Advantages of this Thermometer
• Measures in a matter of seconds
• Auto measurement with distance control
• Multiple uses (wide range of measurement)
• Accurate and reliable
• Gentle and easy to use
• Multiple readings recall
• Safe and hygienic
• Fever alarm
• Guidance system for self-measurement
2. Important Safety Instructions
3. How this Thermometer measures Temperature
4. Control Displays and Symbols
5. Setting Date, Time and Beeper Functions
6. Changing between Body and Object Mode
7. Directions for Use
• Measuring in body mode with auto measurement and
distance control
• Measuring in object mode without auto measurement
8. Changing between Celsius and Fahrenheit
9. How to recall 30 readings in Memory Mode
10. Error Messages
11. Cleaning and Disinfecting
12. Battery Replacement
Microlife Non Contact Thermometer NC 200
EN
1
Measuring sensor
2
Tracking light
3
Self-indicator light
4
Display
5
M-button (memory)
6
MODE button
7
START/IO button
8
Battery compartment cover
9
All segments displayed
AT
Ready for measuring
AK
Measurement complete
AL
Body mode
AM
Object mode
AN
Low battery indicator
AO
Changing between Celsius and Fahrenheit
AP
Recall mode
AQ
Recall the last 30 readings
AR
Measured temperature too high
AS
Measured temperature too low
BT
Ambient temperature too high
BK
Ambient temperature too low
BL
Error function display
BM
Blank display
BN
Flat battery
BO
Date/Time
BP
Beeper function setting
BQ
Replacing the battery
BR
Measuring countdown
BS
Protective cap

Microlife NC 200 Specifications

General

Brand	Microlife
Model	NC 200
Category	Thermometer
Language	English